Abration Resistance Test Pin Made by Hardened Steel Conforms to
The scratch resistance test uses a hardened steel pin for
scratching. The end of the steel pin should be tapered with a apex
angle of 40°. The tip should be rounded with radius of 0.25 mm ±
The hardened steel pin should work with abration reistance tester. When performing the scratch test, scratches were performed at a
speed of 20 mm/s ± 5 mm/s in a plane perpendicular to the edge of
the conductor. The steel pin should be properly loaded so that the
hardened steel pin can apply a force of 10N ± 0.5N along its axial
direction. The pin can equip with 20N weights to reach 30N load.
2. Standard Conforms to : IEC60950 clause 22.214.171.124 and IEC60335-1 clause 21.2.
3. Application: Scratch ressitance test for for accessible parts of solid
insulation of household appliance and printed circuit boards
|Pin Tip||40°Conical sharp|
|Tip circumference radius||0.25mm±0.02mm|
6. COMPETITIVE ADVANTAGE
1). PEGO is professional on electrical lab testing equipment, our
goal is to provide our customers with better price, better quality
and better service.
2). Customized Service: We can help our customers to design and
develop new equipment according to their requirement. We are
flexible and capable Supplier.
3).Excellent Quality: 12 months warranty, 100% guarantee test
before delivery. And all our products can pass the third-lab
calibration which is authorized by ISO17025.
4). After Sales Service and Technical Assistance: 24 hours
technical support by email. Our professional team is always here
willing to be your technical consultant.
5). Quick Delivery: Our company provides just-in-time delivery, and
our freight forwarder can provide transportation services at the
most reasonable price to solve your worries.
6). Prompt Response to Customers: we promise to reply our customers
within 24 hours