Flexo Printing Slotting Machine / Automatic Feeding Water Ink
Printing Making Small Box Packing Machine
The printing unit
1. High quality Φ216mm thick seamless steel tube which
is surface grinding and hard chrome - plating.
2. High quality Φ136mm 220 mesh steel anilox roller
which is made by Tengda Dalian.
3. Using Φ86mm rubber roller Producted by
Chunfeng Jizhou. It is well wear-resisting, oil resistance and acid
and alkali resistant. The roller is in highly grinding so it is
highly printing precision .
4. The pressing adjustment of printing roller adopt high
precision crosshead shoe gapless adjustment to do the slight
adjustment, can make the printing pressure reach best condition.
5. Using 360°electric phase, printing motor button phase adjust
mechanism adopt planetary gear structure, can freely adjust machine
work or stop 360°by electric button when machine running.
6 Ink pump provide ink automatically, lift printing plate by hand.
also with the automatic ink distribution system, which avoid the
bad influence to the printing result when ink dry out because of
machine stop running. Used 1.2inch PVC ink-back tube, smooth tube
wall avoid ink-stuff up and sticking, can send the ink to ink
bucket in time to avoid ink-leak phenomenon.
The Technological parameter
|Max machine speed||120 pieces/min|
|Max feeding size (L * W)||1700mmX600mm|
|Width of printing roller||1600mm|
|Min feeding size (L * W)||450mmX170mm|
|Min slotting interval||Negative knife (A * B)||150mmX50mm|
|Positive knife (A * B)||80mmX80mm|
|Min height of box (H)||70mm|
The Printing slotting machine Photos